PATHR FLEET / OPERATOR RESOURCES

Before & return.
A practical inspection photo guide.

Capture a repeatable set of views so your team can compare observations. Adapt this route to each vessel and the access you have. Never enter an unsafe position to get a photograph.

Open the free inspection kit
  1. Make the boat identifiable.

    Start with a vessel ID and a whole-boat view. Use the same trip reference on the before and return records. Record the inspection time and time zone.

  2. Repeat the same route.

    Use a repeatable order: bow, starboard, stern, port, deck, helm and interior. Take the matching return views from a similar position, distance and angle.

  3. Pair context with detail.

    For a mark or concern, take one wider image showing its position and one close-up. Include a suitable scale when practical. Avoid touching or disturbing the area.

  4. Make the view usable.

    Use steady, well-lit images. Check focus and coverage before moving on. Reflections, spray, shadows, covers and blocked views can hide or resemble damage.

  5. Keep the original evidence.

    Keep original photos and videos, timestamps and file names. Put matching references in the record. For video, note the relevant timestamp and capture clear still views too.

  6. Record uncertainty honestly.

    If there is no matching baseline or the view is poor, say so. Note observations separately from assumptions about cause. Ask a responsible person to review the concern.

Example file names

FL04_TRIP182_before_starboard_01.jpgFL04_TRIP182_return_starboard_01.jpg

Use your own vessel, trip, area and sequence. Keep original media and its metadata.

This guide supports condition records. It is not a technical survey, a safety inspection checklist or a determination of renter liability. Use your vessel-specific procedures and required-equipment checks.
Free template: fleet.getpathr.com/resources/boat-rental-inspection-kit